Drive Belt Tension Check
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Check the drive belt tension after turning the crankshaft clockwise one turn or more.
- Make sure that the indicator mark on the auto-tensioner is within the area marked with A in the illustration.
- If the mark is out of the area A, replace the drive belt (Refer to << A >> DRIVE BELT REMOVAL .)
NOTE:
The drive belt tension adjustment is not necessary as the auto-tensioner is adopted.