LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Intake & Exhaust System) >> Intake Manifold >> Removal And Installation - 3.0L Engine >> Installation Service Points >> >> A << Intake Manifold Installation

>> A << Intake Manifold Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the intake manifold mounting studs with engine oil.
  2. Tighten the intake manifold mounting nuts by the following procedure.
    Order Mounting nuts Tightening torque
    1st Left bank nuts 6.5 ± 1.5 N.m (58 ± 13 in-lb)
    2nd Right bank nuts 22 ± 1 N.m (16 ± 1 ft-lb)
    3rd Left bank nuts 22 ± 1 N.m (16 ± 1 ft-lb)
    4th Right bank nuts 22 ± 1 N.m (16 ± 1 ft-lb)
    5th Left bank nuts 22 ± 1 N.m (16 ± 1 ft-lb)
scientia non olet · About LEMON Manuals