>> B << Exhaust Manifold Bracket Installation
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- After temporarily tightening the exhaust manifold bracket with the installation bolts, check the exhaust manifold fastens securely to the cylinder block.
- Tighten the cylinder block side bolt to the specified tightening torque.
Tightening torque: 41 ± 10 N.m (30 ± 7 ft-lb)
- Tighten the exhaust manifold side bolt to the specified tightening torque.
Tightening torque: 56 ± 8 N.m (41 ± 5 ft-lb)