Exhaust Manifold Check
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Check the exhaust manifold for damage and cracks, and replace it if necessary.
- Using a straight edge and a thickness gauge, check for distortion of the cylinder head installation surface. If it exceeds the limit value, replace it.
2.4L Engine
Limit: 0.70 mm (0.028 inch)
3.0L Engine
Standard value: 0.50 mm (0.020 inch) or less
Limit: 0.70 mm (0.028 inch)