LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Intake & Exhaust System) >> Air Cleaner >> Removal And Installation - 2.4L Engine >> Installation Service Points >> >> B << Air Cleaner Intake Hose Installation

>> B << Air Cleaner Intake Hose Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hose clamps with the tightening bolt at the position shown in the figure.
  2. Check that the tip of tightening bolt does not interfere with the surrounding components.
    Fig 1: Identifying Hose Clamp Bolt
    G09664659Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Hose Clamp Bolt Angle
    G09664660Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals