LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Cooling - Lancer Evolution) >> On-Vehicle Service >> Cooling Fan Relay Continuity Check >> Fan Control Relay Check

Fan Control Relay Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
BATTERY VOLTAGE CONTINUITY CHART

Battery voltage Terminal No. to be connected to tester Continuity test results
Not applied 2 - 4 Continuity (Less than 2 ohms)
Not applied 2 - 5 Open circuit
Connect terminal No. 1 and battery (+) terminal. Connect terminal No. 3 and battery (-) terminal. Continuity (Less than 2 ohms)
Fig 1: Identifying Fan Control Relay
G05393622Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.