WARNING AND WARNING INDICATOR LIST < Standard meter >

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

When OSS failed or operated improperly, OSS-ECU warns the driver to that effect by displaying the one-touch start system warning indicator on the combination meter.

Item	Indicator	Factor	Warning operation
Immobilizer error		Displayed when the certification communication fails with KOS, electrical steering lock, or engine control module. Displayed when the power supply mode is turned ON while the keyless operation key is judged to be brought outside the vehicle with the power supply mode in ACC, or when the engine starting operation is performed after such a status. Displayed when the electrical steering lock cannot be locked because there is a P detection switch malfunction.	The warning indicator illuminates.
Steering turn indication		Displayed when the steering lock is not unlocked because the steering force is applied.	The warning indicator flashes. Tone alarm sounds.
Electrical steering lock malfunction		Displayed when a malfunction occurs to the steering lock system.	The warning indicator illuminates. Tone alarm sounds.
Steering lock not locked	-	The door is open with the steering lock not locked.	Tone alarm sounds.
Power supply system error		Displayed when an error occurs to the power supply system.	The warning indicator illuminates. Tone alarm sounds.
Power OFF indication	-	The door is open with the power supply mode in ON or in ACC.	Tone alarm sounds.