WARNING AND WARNING INDICATOR LIST < High contrast meter >

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

When OSS failed or operated improperly, KOS-ECU warns the driver to that effect by displaying the one-touch start system warning on the multi information display in the combination meter.

Item		Factor
Immobilizer error	IMMOBILIZER SYSTEM SERVICE REQUIRED	Displayed when the certification communication fails with KOS, electrical steering lock, or engine control module. Displayed when the power supply mode is turned ON while the keyless operation key is judged to be brought outside the vehicle with the power supply mode in ACC, or when the engine starting operation is performed after such a status. Displayed when the electrical steering lock cannot be locked because there is a P detection switch malfunction.
Steering turn indication	PUSH ENGINE SWITCH WHILE TURNING STEERING WHEEL	Displayed when the steering lock is not unlocked because the steering force is applied.
Electrical steering lock malfunction	STEERING LOCK SERVICE REQUIRED	Displayed when a malfunction occurs to the steering lock system.
Shift P indication	SHIFT TO P POSITION	Displayed if the shift lever is in other than "P" range when the engine is not running.
Steering lock not locked	STEERING WHEEL UNLOCKED	Displayed when the door is open with the steering lock not locked.
Power supply system error	ELECTRICAL SYSTEM SERVICE REQUIRED	Displayed when an error occurs to the power supply system.
Engine starting method	PRESS BRAKE PEDAL TO START ENGINE	Displayed when the shift lever is in other than "P" range or "N" range at the engine start, or when the engine switch is pressed without the brake pedal depressed.
Power OFF indication	-	Displayed when the door is open with the power supply mode in ON or in ACC.