LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Keyless Operation System (Kos) - With Diagnostics) >> Diagnosis < OSS-Ecu > >> Data List Reference Table

Data List Reference Table

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Item No. Check item Check condition Normal condition
1 Engine switch(1) When the engine switch is pressed ON
When the engine switch is not pressed OFF
2 Engine switch(2) When the engine switch is pressed ON
When the engine switch is not pressed OFF
3 Stoplight switch When the brake pedal is depressed ON
When the brake pedal is released OFF
8 P range detect SW Shift the selector lever to the position other than the P position. Outside park
Shift the selector lever to the P position. Park
13 Cranking signal output (monitor) Cranking ON
Other than above OFF
15 IG1 output (monitor) Power supply mode is turned ON or the engine is being started by the pressing of engine switch. ON
Other than above OFF
16 IG2 output (monitor) Power supply mode is turned ON. ON
Other than above OFF
17 OSS power supply status(1) Power supply mode is abnormal. Default or SNA
Power supply mode is OFF. IG OFF
Power supply mode is ACC. IG ACC
Power supply mode is ON. IG ON
Ignition switch ON IG START
Ignition switch ON IG RUN (judging)
18 +B1 Power supply voltage (AD) Always System voltage
19 +B2 Power supply voltage (AD) Always System voltage
20 ESL unlock SW(1) Unlock SW (1) is abnormal. Default or SNA
Electric steering lock: Unlock ON
Electric steering lock: Lock OFF
21 ESL lock SW Lock SW is abnormal. Default or SNA
Electric steering lock: Unlock OFF
Electric steering lock: Lock ON
22 ESL unlock SW(2) Unlock SW (2) is abnormal. Default or SNA
Electric steering lock: Unlock ON
Electric steering lock: Lock OFF
23 ESL status Electric steering lock is abnormal. Default or SNA
Electric steering lock: Lock or unlock drive Driving
Electric steering lock is not in operation. Stop
Electric steering lock is in fail-safe operation. Fail
(1) Indicates the output status of OSS-ECU.