Trouble Symptom Chart

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

Trouble symptom	Inspection procedure number	Reference
CANNOT COMMUNICATE WITH KOS-ECU USING THE SCAN TOOL.	1	Inspection Procedure 1: Cannot communicate with KOS-ECU using the scan tool
THE KEYLESS OPERATION KEY CANNOT BE REGISTERED USING THE SCAN TOOL.	2	Inspection Procedure 2: The keyless operation key cannot be registered using the scan tool
ABNORMALITY IN KOS-ECU POWER SUPPLY AND GROUND CIRCUITS.	3	Inspection Procedure 3: Abnormality in KOS-ECU power supply and ground circuits
KEYLESS OPERATION WARNING DISPLAY DOES NOT DISAPPEAR.	4	Inspection Procedure 4: Keyless operation warning display does not disappear
NO DOOR WILL BE LOCKED OR UNLOCKED BY OPERATING A LOCK/UNLOCK SWITCH ON ANY DOOR.	5	Inspection Procedure 5: No door will be locked or unlocked by operating a lock/unlock switch on any door
DRIVER'S DOOR LOCK/UNLOCK SWITCH DOES NOT WORK.	6	Inspection Procedure 6: Driver's door lock/unlock switch does not work
FRONT PASSENGER'S DOOR LOCK/UNLOCK SWITCH DOES NOT WORK.	7	Inspection Procedure 7: Front passenger's door lock/unlock switch does not work
THE LOCK SWITCH AND OPEN SWITCH OF THE LIFTGATE LOCK RELEASE HANDLE DO NOT WORK.	8	Inspection Procedure 8: The lock switch and open switch of the liftgate lock release handle do not work
THE LOCK SWITCH OF THE LIFTGATE LOCK RELEASE HANDLE DOES NOT PERFORM THE LOCKING OPERATION.	9	Inspection Procedure 9: The lock switch of the liftgate lock release handle does not perform the locking operation
THE OPEN SWITCH OF THE LIFTGATE LOCK RELEASE HANDLE DOES NOT PERFORM THE UNLOCKING OPERATION.	10	Inspection Procedure 10: The open switch of the liftgate lock release handle does not perform the unlocking operation
KEYLESS ENTRY FUNCTION DOES NOT WORK.	11	Inspection Procedure 11: Keyless entry function does not work
KOS TIMER LOCK FUNCTION DOES NOT WORK.	12	Inspection Procedure 12: KOS timer lock function does not work
KEYLESS ENTRY HAZARD ANSWERBACK FUNCTION OR THE DOOM LIGHT ANSWERBACK FUNCTION DOES NOT WORK NORMALLY.	13	Inspection Procedure 13: Keyless entry hazard answerback function or the dome light answerback function does not work normally
OUTER TONE ALARM DOES NOT SOUND.	14	Inspection Procedure 14: Outer tone alarm does not sound