LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - With Diagnostics) >> Side-Airbag Module(S) >> Removal And Installation >> Removal Service Point >> << B >> Front Seatback Frame (With Side-Airbag Module) Removal

<< B >> Front Seatback Frame (With Side-Airbag Module) Removal

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When replacing the side-airbag module, replace the front seatback frame.
  • Never use an electric tester to diagnose the air bag module circuit. Never attempt to disassemble the air bag module.
  • Store the removed front seatback frame in a clean and dry place.
  • When discarding the air bag module, discard after deploying the air bag as specified in the service procedure (Refer to PASSENGER'S AIR BAG ON/OFF INDICATOR LIGHT  ).