LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - With Diagnostics) >> SRS Air Bag Diagnosis >> Diagnostic Trouble Code Procedures < Occupant Classification-Ecu > >> DTC B2212 OCM internal error >> Diagnosis

DTC B2212 OCM internal error: Diagnosis

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. STEP 1.Recheck for diagnostic trouble code. 

    Check again if the DTC is stored to the occupant classification-ECU.

    CAUTION: To prevent damage to scan tool (M.U.T.-III), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-III).
    1. Connect scan tool (M.U.T.-III) to the data link connector.
    2. Erase the DTC.
    3. Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
    4. Check if DTC is stored.
    5. Turn the ignition switch to the "LOCK" (OFF) position.

    Q: Is the DTC stored? 

    1. YES:  Replace the front seat cushion cover and pad assembly.
    2. NO:  The trouble can be an intermittent malfunction (Refer to HOW TO COPE WITH INTERMITTENT MALFUNCTION ).
scientia non olet · About LEMON Manuals