LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - With Diagnostics) >> Driver's Air Bag Module And Clock Spring >> Removal And Installation >> Installation Service Points >> >> C << Steering Wheel Assembly Installation

>> C << Steering Wheel Assembly Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When installing the steering wheel assembly, do not trap the clock spring harness.
  1. After checking that the clock spring center alignment is already performed, install the steering wheel assembly so that its boss part is aligned with the rib of the clock spring slowly.
  2. After the installation, check that there is no abnormality when the steering wheel is fully turned to left and right.
    Fig 1: Identifying Steering Wheel Assembly Ribs
    G09666768Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals