LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (General - Electrical) >> How To Diagnose >> Checking Switches

Checking Switches

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

In a circuit diagram, a switch is shown in the idle state.

  1. Normally open or normally closed switch

    Switches are classified into those which open the circuit and those which close the circuit when off.

    Switches are shown in illustration in their normal state unless specified otherwise.

    Fig 1: Identifying Normally Open/Closed Switch
    G09663274Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Switch connection

    This figure illustrates a complex switch. The continuity between terminals at each position is as indicated in the table below.

    SWITCH POSITION TESTER CONNECTION SPECIFIED CONDITION
    OFF - -
    1st stage 1-5-6 Continuity
    2nd stage 1-4-6 Continuity
    3rd stage 1-3-6 Continuity
    4th stage 1-2-6 Continuity
    Fig 2: Identifying Switch Connection
    G09663275Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.