Lubricant Capacity Table
WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
| Description | Specification | |||
|---|---|---|---|---|
| Engine oil dm3 (qt) | Total quantity | 4.6 (4.86) < 2.4 L Engine > 4.3 (4.54) < 3.0 L Engine > | ||
| Oil filter | 0.3 (0.32) | |||
| Engine coolant [includes 0.65 dm3 (0.69 qt) in the radiator condenser tank] dm3 (qt) | 2.4L Engine | 6.0 (6.34) | ||
| 3.0L Engine | 9.0 (9.51) | |||
| Fuel tank dm3 (gal) | FWD | 63 (16.6) | ||
| AWD | 60 (15.8) | |||
| Transmission (CVT) fluid dm3 (qt) | 7.1 (7.5) | |||
| Transmission (6A/T) fluid dm3 (qt) | 8.2 (8.7) | |||
| Transfer oil dm3 (qt) < AWD > | Vehicles without S-AWC | 0.47 (0.50) | ||
| Vehicles with S-AWC | 0.45 (0.48) | |||
| Rear differential gear oil dm3 (qt) | 0.4 (0.42) | |||
| Driveshaft (inside of knuckle bore) grease g (oz) | As required [1.0 - 1.5 (0.04 - 0.05)] | |||
| Driveshaft (PTJ boot, EBJ boot) grease g (oz) | PTJ boot grease | 4J1-FWD | LH | 210 ± 10 (7.4 ± 0.3) |
| RH | 210 ± 10 (7.4 ± 0.3) | |||
| 4J1-AWD | LH | 200 ± 10 (7.1 ± 0.3) | ||
| RH | 210 ± 10 (7.4 ± 0.3) | |||
| 6B3-FWD | LH | 245 ± 10 (7.1 ± 0.3) | ||
| RH | 255 ± 10 (7.4 ± 0.3) | |||
| 6B3-AWD | LH | 200 ± 10 (7.1 ± 0.3) | ||
| RH | 210 ± 10 (7.4 ± 0.3) | |||
| EBJ boot grease | 4J1 | 120 ± 10 (4.2 ± 0.3) | ||
| 6B3 | 120 ± 10 (4.2 ± 0.3) | |||
| Driveshaft (ETJ boot) grease g (oz) | ETJ boot grease | 75 ± 10 (2.6 ± 0.4) | ||
| Brakes fluid dm3 (qt) | As required | |||
| Wiper motor link rod grease g (oz) | As required | |||
| Air conditioning compressor refrigerant unit oil dm3 (qt) | Compressor refrigerant unit | 70 + 20 (target value: 70) | ||
| Each connection of refrigerant line | As required | |||