LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (General Information) >> Maintenance Service >> Ball Joint And Steering Linkage Seals >> Inspect For Grease Leaks And Damage

Inspect For Grease Leaks And Damage

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. These components, which are permanently lubricated at the factory, do not require periodic lubrication. Damaged seals and bellows should be replaced to prevent leakage or grease contamination.
  2. Inspect the dust cover and bellows for proper sealing, leakage and damage, and replace them if defective.
    Fig 1: Identifying Boot And Dust Cover
    G09663241Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals