INSPECTION PROCEDURE 3: Poor Ride
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS
- STEP 1. Check for improper tire inflation pressure.
Refer to TIRE INFLATION PRESSURE CHECK .
Q: Is the tire inflation correct?
YES : Go to Step 2.
NO : Adjust it, then go to Step 4.
- STEP 2. Check for broken or deteriorated coil spring(s).
Q: Are the coil spring(s) broken or deteriorated?
YES : Replace the coil spring(s), then go to Step 4.
NO : Go to Step 3.
- STEP 3. Check for strut assembly damage.
Q: Is the strut assembly damaged?
YES : Replace it, then go to Step 4.
NO : Go to Step 4.
- STEP 4. Retest the system.
Q: Is the malfunction eliminated?
YES : The procedure is complete.
NO : Return to Step 1.