Wheel RUNOUT Check
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Jack up the vehicle so that the wheels are clear of the floor. While slowly turning the wheel, measure wheel runout with a dial indicator.
Limit:
WHEEL RUNOUT SPECIFICATION
| Items | Aluminum wheel |
|---|---|
| Radial runout | 1.0 mm (0.04 inch) or less |
| Lateral runout | 1.0 mm (0.04 inch) or less |
If wheel runout exceeds the limit, replace the wheel.