Symptom Procedures: Diagnosis

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check if the seal is faulty.
Q: Is the seal faulty?

YES : Repair the seal, then go to Step 3.

NO : Go to Step 2.
STEP 2. Check if the body flange is deformed.
Q: Is the body flange deformed?

YES : Replay the body flange, then go to Step 3.

NO : Go to Step 3.
STEP 3. Retest the system.
Q: Is any water leaking?

YES : Return to Step 1.

NO : This diagnosis complete.