Sunroof Motor Assembly Terminal Check
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SUNROOF MOTOR ASSEMBLY TERMINAL CONNECTOR TERMINAL REFERENCE
| Terminal number | Check items | Check conditions | Normal conditions |
|---|---|---|---|
| 1 | Ground | Always | 0 V |
| 2 | Ground | Always | 0 V |
| 3 | Battery power supply | Ignition switch: ON | Battery voltage |
| 4 | Input from sunroof switch (tilt-up) | Sunroof switch: Up | 0 V |
| 5 | Input from sunroof switch (open) | Sunroof switch: Open | 0 V |
| 6 | Battery power supply | Always | Battery voltage |
| 7 | LIN communication line (between ETACS-ECU) | Always | 0 to 12 V (pulse signal) |
| 8 | - | - | - |
| 9 | - | - | - |
| 10 | Input from sunroof switch (close or down) | Sunroof switch: Close or down | 0 V |