Comments On Trouble Symptom
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
If the pulse 1 signal from the front power window motor (LH) cannot be received, the power window main switch sets the diagnosis trouble code No. L0730.
If the pulse 2 signal from the front power window motor (LH) cannot be received, the power window main switch sets the diagnosis trouble code No. L0732.
If the driver's door window glass exceeds the fully closed position, power window main switch sets the diagnostic trouble code No. L0734.
If the ground fault of the front power window motor (LH) sensor power supply is detected, power window main switch sets the diagnosis trouble code No. L0736
If the anti-trap function is activated consecutively three times or more, power window main switch sets the diagnostic trouble code No. L0740.
- If the power window main switch information signals cannot be read, power window main switch sets the diagnostic trouble code No. L0746.
- If the driver's door window glass position cannot be read, power window main switch sets the diagnostic trouble code No. L0750.