LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >> A << Air Breather Installation

>> A << Air Breather Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply specified sealant to the periphery of the air breather insertion part.

    Specified sealant: 

    Three bond 1501 or equivalent 

  2. Install the air breather to the transaxle case in accordance with the illustrated identification mark.
    Fig 1: Applying Specified Sealant To Periphery Of Air Breather Insertion Part
    G05394047Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals