LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Output Shaft >> Inspection >> Speed Gears

Speed Gears

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the helical and clutch gears of each speed gear are not damaged or worn in the tooth surface.
  2. Check that the synchronizer cones of the 1st and 2nd speed gears are not roughened, damaged or worn in the surface.
  3. heck that the inner, front and rear surfaces of each speed gear are not damaged or worn.
    Fig 1: Locating Gear Tooth
    G05393991Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals