LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Fastener Tightening Specifications >> Transaxle >> Transfer

Fastener Tightening Specifications: Transaxle: Transfer

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS

Item Specification
Transfer heat protector 10 ± 2 N.m (88 ± 17 in-lb)
Drive shaft heat protector 9.0 ± 1.0 N.m (79 ± 8 in-lb)
scientia non olet · About LEMON Manuals