LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Control Housing >> Disassembly And Assembly >> Assembly Service Points >> >> B << Oil Seal Installation

>> B << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool, MB991246, install the oil seal.
  2. Apply specified transmission oil to the oil seal lip area.

    Specified transaxle oil: 

    Mitsubishi Genuine DiaQueen New Multi Gear oil SAE 75W-80 (GL-3) 

    Fig 1: Identifying Special Tool (MB991246) On Oil Seal
    G05394032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals