LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Clutch Housing >> Disassembly And Assembly >> Assembly Service Points >> >> D << Oil Seal Installation

>> D << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool, MB992271 and MB992075, drive the oil seal squarely into the clutch housing.
    Fig 1: Identifying Special Tool (MB992271 And MB992075)
    G05394043Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Apply specified grease to the oil seal lip area.

    Specified grease: 

    Retinax A 

    Fig 2: Applying Specified Grease To Oil Seal Lip Area
    G05394044Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals