<< B >> Taper Roller Bearing Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Using a chisel or the like, knock off the roller cage of the taper roller bearing.
Using the special tools, MD998917, MD998812, MD998813 and MD998830, indicated below, remove the taper roller bearing.

Fig 1: Identifying Special Tools (MD998917, MD998812, MD998813 And MD998830)
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.