Snap ring (For adjustment of reverse idler gear thrust washer end play)
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SNAP RING THICKNESS SPECIFICATION
| Thickness mm (in) |
Thickness mm (in) |
| 1.77 (0.0697) |
2.12 (0.0835) |
| 1.82 (0.0717) |
2.17 (0.0854) |
| 1.87 (0.0736) |
2.22 (0.0874) |
| 1.92 (0.0756) |
2.27 (0.0894) |
| 1.97 (0.0776) |
2.32 (0.0913) |
| 2.02 (0.0795) |
2.37 (0.0933) |
| 2.07 (0.0815) |
2.42 (0.0953) |