Snap ring (For adjustment of output shaft 3rd speed gear end play)
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SNAP RING THICKNESS SPECIFICATION
| Thickness mm (in) |
Thickness mm (in) |
| 2.23 (0.0878) |
2.47 (0.0972) |
| 2.27 (0.0894) |
2.51 (0.0988) |
| 2.31 (0.0909) |
2.55 (0.1004) |
| 2.35 (0.0925) |
2.59 (0.1020) |
| 2.39 (0.0941) |
2.63 (0.1035) |
| 2.43 (0.0957) |
2.67 (0.1051) |