LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Clutch Overhaul - Lancer Evolution) >> Clutch >> Removal And Installation >> Installation Service Points >> >> C << Clutch Disc/Clutch Cover Installation

>> C << Clutch Disc/Clutch Cover Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply specified grease to the clutch disc splines.

    Specified grease: 

    Mitsubishi Part No. 0101011 or equivalent 

  2. Using a general service tool, position the clutch disc on the flywheel.
  3. Install the clutch cover onto the flywheel, and tighten bolts in the diagonal order.
  4. Remove the general service tool.
    Fig 1: Applying Specified Grease To Clutch Disc Splines
    G05393858Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals