Differential Mechanism Part

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Required Special Tools:

MB991245: Lower arm bush ring

Remove the driveshaft. (Refer to DRIVESHAFT ASSEMBLY .)
Remove the AYC differential carrier oil seal.
Use special tool MB991245 to press-fit a new oil seal.
Apply multi-purpose grease to the oil seal lip and driveshaft oil seal seating area.

Fig 1: Applying Multi-Purpose Grease To Oil Seal Lip And Driveshaft Oil Seal Seating Area

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Replace the driveshaft circlip with a new one, and install the driveshaft to the differential carrier. (Refer to DRIVESHAFT ASSEMBLY .)