LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Rear Axle - Lancer Evolution) >> Hydraulic Unit >> Removal And Installation >> Installation Service Points >> >> A << Reservoir Hose Assembly Installation

>> A << Reservoir Hose Assembly Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the oil reservoir side, insert the hose to the position shown in the figure.
  2. On the hydraulic unit side, insert the hose to the spool shown in the figure.
    Fig 1: Identifying Reservoir Hose Installation Position
    G05394456Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals