LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Rear Axle - Lancer Evolution) >> Differential Carrier Assembly >> Removal And Installation >> Removal Service Point >> << A >> Propeller Shaft Disconnection

<< A >> Propeller Shaft Disconnection

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Put mating marks on the flange yoke and the differential companion flange and remove the connecting nuts.
    2. Fig 1: Aligning Marks On Flange Yoke And Differential Companion Flange
    G05394290Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Suspend the disconnected propeller shaft from the body with a wire to prevent bending.
scientia non olet · About LEMON Manuals