Rear Suspension CROSSMEMBER Bushing (For Rear Differential Mount) Replacement

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear differential
Use special tools MB991162, MB991218, MB992253 and MB992254 to remove the bushing.
NOTE: When removing the bushing, insert special tool MB991162 from the forward of vehicle and fix the nut with a wrench.

Fig 1: Identifying Bushing With Special Tools
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Use special tools MB990847, MB991162, MB991218, MB992234, MB992235 and MB992253 to press-fit the bushing.
NOTE: When installing the bushing, insert special tool MB991162 from the forward of vehicle and fix the nut with a wrench.

Fig 2: Identifying Bushing With Special Tools
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the rear differential.