LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Fuel Supply - Lancer Evolution) >> Fuel Tank >> Disassembly And Assembly >> Assembly Service Point >> << A >> Fuel Level Sensor (Sub)/Fuel Pump Module Removal

<< A >> Fuel Level Sensor (Sub)/Fuel Pump Module Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When removing the fuel level sensor (sub) and fuel pump module from the fuel tank, be careful not to damage the gauge unit and float of the fuel level sensor (sub) and fuel pump module.

While removing the fuel pump module form the fuel tank, disconnect the fuel tank suction hose from the fuel pump module, and remove the fuel pump module form the fuel tank.

Fig 1: Disconnecting Fuel Tank Suction Hose And Fuel Pump Module From Service Hole
G05393575Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.