Seat Belt Buckle Switch Continuity Check (Passenger's Side)
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Power supply voltage: 5V
TERMINALS CONTINUITY CHART
| Check condition |
Power supply connection |
Normal condition |
| The seatbelt is fastened. |
- Connect terminal No.1 to the negative terminal.
- Connect terminal No.2 to the positive terminal.
|
12 --17 mA |
| The seatbelt is not fastened. |
4 --7 mA |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.