Seat Belt Buckle Switch Continuity Check (Driver's Side)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

TERMINALS REFERENCE CHART

Item	Tester connection	Specified condition
Fastened seat belt	1 --2	Open circuit
Unfastened seat belt	1 --2	Continuity exists (2Ω or less)

Fig 1: Identifying Seat Belt Buckle Switch (Driver's Side) Connector Terminals

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.