C: Valve Tappet Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Do not use pliers or other tools to remove the valve tappets. Always remove them by hand.
When reusing the removed valve tappet, it has to be installed in the same position as before. Be sure to put a tab that shows the original installation position on the valve tappet when storing it.

Remove all of the valve tappets by hand.

Fig 1: Removing Valve Tappets

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.