LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Mechanical - Lancer Evolution) >> Timing Chain >> Removal And Installation >> Installation Service Points >> C: Crankshaft Front Oil Seal Installation

C: Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply a small amount of engine oil to the entire inner diameter of the oil seal lip.
    CAUTION: When installing the crankshaft oil seal, be careful to avoid damage to the crankshaft front oil seal.
    Fig 1: Installing Crankshaft Front Oil Seal
    G05374167Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using special tool MB991448, press in the crankshaft front oil seal up to the chamfered surface of timing chain case.
scientia non olet · About LEMON Manuals