B: Engine Oil Pan Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine oil pan mounting bolts.
CAUTION: Do not forcibly drive in special tool MD998727 to avoid damage to the engine oil pan seal surface of cylinder block assembly.
Insert special tool MD998727 from the engine oil pan removal groove of the cylinder block assembly.
Lightly tap the special tool with a hammer to slide the oil pan seal surface, cut off the liquid gasket, and remove the engine oil pan.

Fig 1: Identifying Engine Oil Pan And Crankshaft Pulley
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Engine Oil Pan And Engine Oil Filter
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Inserting Special Tool MD998727 From Engine Oil Pan
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.