>> A << Clutch Tube Assembly Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When connecting each part, check that the O-ring and clip are not damaged.
If any connection area or O-ring is dirty, clean with the clutch fluid.

Assemble the clips to the clutch master cylinder and clutch tube assembly B. Then, connect the clutch tube assembly A.

Fig 1: Identifying Clutch Master Cylinder And Clutch Tube Assembly

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Identifying Clutch Tube Assembly, Clip And O-Ring

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.