LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Steering -- Lancer Evolution) >> Power Steering Gear Box And Linkage >> Removal And Installation >> Removal Service Points >> << C >> Front Suspension CROSSMEMBER Removal

<< C >> Front Suspension CROSSMEMBER Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Jack up and support the crossmember, and remove it.
    2. Fig 1: Jacking Up And Supporting Crossmember
    G05376510Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Check the hoses and harnesses for roughness, and then remove the front suspension crossmember with the rear roll stopper and the steering gear and linkage installed.
scientia non olet · About LEMON Manuals