INSPECTION PROCEDURE 12: Oil Leakage from Oil Reservoir: Diagnosis
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the oil reservoir for damage.
Q: Is there damage?
YES : Repair or replace it. Then go to Step 3.
NO : Go to Step 2.
- STEP 2. Check for overflowing.
Q: Is there oil overflowing from the reservoir?
YES : Adjust fluid level. Then go to Step 3.
NO : Go to Step 3.
- STEP 3. Retest the system.
Q: Is there oil leakage?
YES : Repeat from Step 1.
NO : The procedure is complete.