LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Chassis Electrical - Lancer Evolution (2 Of 5)) >> Side Turn-Signal Light >> Removal And Installation >> Removal Service Point >> << A >> Side Turn-Signal Light Removal

<< A >> Side Turn-Signal Light Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Push the side turn-signal light toward the vehicle rear to bend the hook, and then remove by disengaging the tab from the fender panel.

Fig 1: Pushing Side Turn-Signal Light
G05385359Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Claw And Hook Of Side Turn-Signal Light
G05385360Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.