Customization Function
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Dome light delay timer with door | Adjustment of interior light delay shutdown time | 0 sec | 0 second (no delay shutdown time) |
| 7. 5 sec | 7. 5 seconds | ||
| 15 sec | 15 seconds | ||
| 30 sec | 30 seconds (default) | ||
| 60 sec | 60 seconds | ||
| 120 sec | 120 seconds | ||
| 180 sec | 180 seconds | ||
| Interior light auto cut timer | Adjustment of interior light automatic shutdown function operation time | Disable | No function |
| 3 min | 3 minutes | ||
| 30 min | 30 minutes (default) | ||
| 60 min | 60 minutes |