LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2014 >> Lancer ES Sportback >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Chassis Electrical - Lancer Evolution (2 Of 5)) >> Column Switch >> Column Switch (Switch Body Part) Continuity Check

Column Switch (Switch Body Part) Continuity Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lighting switch and wiper/washer switch.
  2. Check that the continuity is present for the same terminal numbers of the column switch body connectors that remain on the steering column.
    COLUMN SWITCH SPECIFICATION

    Column switch body Terminal number Normal condition
    Lighting switch side connector
    Wiper/washer switch side connector    		 3-3
    6-6
    7-7
    8-8
    9-9
    10-10
    11-11    		 Continuity exists (2 ohms or less)
    Fig 1: Identifying Lighting Switch And Wiper/Washer Switch Terminals
    G05385400Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals