| Power is not turned ON when the power switch is turned ON. |
INSPECTION PROCEDURE 1: POWER IS NOT TURNED ON WHEN THE POWER SWITCH IS TURNED ON. |
| No sound is heard. < Vehicles with audio amplifier > |
INSPECTION PROCEDURE 2: NO SOUND IS HEARD. < VEHICLES WITH AUDIO AMPLIFIER > |
| No sound is heard from one of the speakers. |
< Vehicles without audio amplifier > |
INSPECTION PROCEDURE 3: NO SOUND IS HEARD FROM ONE OF THE SPEAKERS. < VEHICLES WITHOUT AUDIO AMPLIFIER > |
| < Vehicles with audio amplifier > |
INSPECTION PROCEDURE 3: NO SOUND IS HEARD FROM ONE OF THE SPEAKERS. < VEHICLES WITH AUDIO AMPLIFIER > |
| The audio does not operate normally by operating the radio and CD player of the center panel unit. |
INSPECTION PROCEDURE 4: THE AUDIO DOES NOT OPERATE NORMALLY BY OPERATING THE RADIO AND CD PLAYER OF THE CENTER PANEL UNIT. |
| Audio illuminations does not work normally. |
INSPECTION PROCEDURE 5: AUDIO ILLUMINATIONS DOES NOT WORK NORMALLY. |
| The sound of external input are not played. |
INSPECTION PROCEDURE 6: THE SOUND OF EXTERNAL INPUT ARE NOT PLAYED. |
| Noise |
Noise is present while moving (AM). |
INSPECTION PROCEDURE 7: NOISE IS PRESENT WHILE MOVING (AM). |
| Noise is present while moving (FM). |
INSPECTION PROCEDURE 8: NOISE IS PRESENT WHILE MOVING (FM). |
| Sound mixed with noise, only at night (AM). |
INSPECTION PROCEDURE 9: SOUND MIXED WITH NOISE, ONLY AT NIGHT (AM). |
| Noise is overpowering both AM and FM. |
INSPECTION PROCEDURE 10: NOISE IS OVERPOWERING BOTH AM AND FM. |
| Excessive noise on AM and FM. |
INSPECTION PROCEDURE 11: EXCESSIVE NOISE ON AM AND FM. |
| Noise is detected with engine running. |
INSPECTION PROCEDURE 12: NOISE IS DETECTED WITH ENGINE RUNNING. |
| Noise appears during vibration or shocks. |
INSPECTION PROCEDURE 13: NOISE APPEARS DURING VIBRATION OR SHOCKS. |
| Noise is present while moving (FM). |
INSPECTION PROCEDURE 14: NOISE IS PRESENT WHILE MOVING (FM). |
| Constant noise. |
INSPECTION PROCEDURE 15: CONSTANT NOISE. |
| Radio |
No reception (AM). |
INSPECTION PROCEDURE 16: NO RECEPTION (AM). |
| Poor reception. |
INSPECTION PROCEDURE 17: POOR RECEPTION. |
| Distortion on AM and/or FM. |
INSPECTION PROCEDURE 18: DISTORTION ON AM AND/OR FM. |
| Distortion on FM only. |
INSPECTION PROCEDURE 19: DISTORTION ON FM ONLY. |
| Auto select function inoperative, too few automatic stations are selected. |
INSPECTION PROCEDURE 20: AUTO SELECT FUNCTION INOPERATIVE, TOO FEW AUTOMATIC STATIONS ARE SELECTED. |
| Preset stations are erased. |
INSPECTION PROCEDURE 21: PRESET STATIONS ARE ERASED. |
| CD player |
CD cannot be inserted. |
INSPECTION PROCEDURE 22: CD CAN NOT BE INSERTED. |
| No sound. (CD only). |
INSPECTION PROCEDURE 23: NO SOUND. (CD ONLY) |
| CD sound skips. |
INSPECTION PROCEDURE 24: CD SOUND SKIPS. |
| Sound quality is poor. |
INSPECTION PROCEDURE 25: SOUND QUALITY IS POOR. |
| CD cannot be ejected. |
INSPECTION PROCEDURE 26: CD CAN NOT BE EJECTED. |