Trouble Symptom Chart

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

TROUBLE SYMPTOM CHART

Trouble symptom	Inspection Procedure No.
No navigation screen is displayed.	INSPECTION PROCEDURE 1: NO NAVIGATION SCREEN IS DISPLAYED.
No sound is heard. < Vehicles with audio amplifier >	INSPECTION PROCEDURE 2: NO SOUND IS HEARD. < VEHICLES WITH AUDIO AMPLIFIER >
No sound is heard from one of the speakers. < vehicles with audio amplifier >	INSPECTION PROCEDURE 3: NO SOUND IS HEARD FROM ONE OF THE SPEAKERS. < VEHICLES WITH AUDIO AMPLIFIER >
The navigation system can be operated while the vehicle is driven.	INSPECTION PROCEDURE 4: THE NAVIGATION SYSTEM CAN BE OPERATED WHILE THE VEHICLE IS DRIVEN.
The screen is not normal in the navigation mode. (The displayed position of the vehicle mark deviates).	INSPECTION PROCEDURE 5: THE SCREEN IS NOT NORMAL IN THE NAVIGATION MODE. (THE OWN VEHICLE MARK IS DISLOCATED).
Poor reception.	INSPECTION PROCEDURE 6: POOR RECEPTION.
GPS signal can not be received.	INSPECTION PROCEDURE 7: GPS SIGNAL CAN NOT BE RECEIVED.
CD (compact disk)/DVD (Video Disk) cannot be played.	INSPECTION PROCEDURE 8: CD (COMPACT DISK)/DVD (VIDEO DISK) CANNOT BE PLAYED.
Image of a DVD (video disk) is played, but no sound is played.	INSPECTION PROCEDURE 9: IMAGE OF A DVD (VIDEO DISK) IS PLAYED, BUT NO SOUND IS PLAYED.
Sound of a DVD (video disk) can be played, but no image is played.	INSPECTION PROCEDURE 10: SOUND OF A DVD (VIDEO DISK) CAN BE PLAYED, BUT NO IMAGE IS PLAYED.
The picture and sound of external input are not played.	INSPECTION PROCEDURE 11: THE PICTURE AND SOUND OF EXTERNAL INPUT ARE NOT PLAYED.
Check the CAN box unit power supply circuit.	INSPECTION PROCEDURE 12: CHECK THE CAN BOX UNIT POWER SUPPLY CIRCUIT.