Memory Initialization

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Select "Memory Initialization" on "Service" screen.

Fig 1: Scan Tool Display - Memory Initialization
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
If you select "Start" on "Memory Initialization" screen, the settings such as registered locations and music server will be erased (initialized) from the memory.
NOTE: If the ignition switch is turned to "LOCK" (OFF) position during the initialization, the initialization will be suspended. If the ignition switch is turned to "ACC" or "ON" position, the initialization will be resumed.
After the memory initialization is complete, the navigation system will restart automatically.

Fig 2: Scan Tool Display - Memory Initialization
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Scan Tool Display - Memory Initialization
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.