Section 105 (MULTIPORT Fuel Injection (MFI) (4 Of 6) - Lancer Evolution)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0450: Fuel Tank Differential Pressure Sensor Malfunction
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0451: Fuel Tank Differential Pressure Circuit Range/Performance Problem
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0452: Fuel Tank Differential Pressure Circuit Low Input
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0453: Fuel Tank Differential Pressure Circuit High Input
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0443: Evaporative Emission Purge Solenoid Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0446: Evaporative Emission Ventilation Solenoid Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0455: Evaporative Emission System Leak Detected (Gross Leak)
- Notes
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0456: Evaporative Emission System Leak Detected (Very Small Leak)
- Notes
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- Monitor Execution Conditions (Other Monitor And Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensors below are determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- Troubleshooting Hints (The Most Likely Causes For This Code To Be Set Are:)
- Diagnosis
DTC P0461: Fuel Level Sensor (main) Circuit Range/Performance
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
  - Logic Flow Chart
  - Check Condition, Judgement Criterion
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0462: Fuel Level Sensor Circuit Low Input
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0463: Fuel Level Sensor Circuit High Input
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0500: Vehicle Speed Signal Malfunction
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC SET CONDITIONS (Entry Conditions and Malfunction Thresholds)
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0506: Idle Control Sytem RPM Lower Than Expected
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0507: Idle Control Sytem RPM Higher Than Expected
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0513: Immobilizer Malfunction
- Technical Description
- DTC Set Conditions
  - Check Condition
  - Judgment Criterion
- Fail-Safe And Backup Function
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0551: Power Steering Pressure Switch Circuit Range/Performance
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0554: Power Steering Pressure Switch Circuit Intermittent
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0603: EEPROM Malfunction
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0606: Engine Control Module Main Processor Malfunction
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
  - Check Condition
  - Judgement Criterion
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0622: Generator FR Terminal Circuit Malfunction
- Notes
- Circuit Operation
- Technical Description
- DTC Set Conditions
  - Check Condition
  - Judgement Criterion
- Fail-Safe And Backup Function
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set area:)
- Diagnosis
DTC P0630: Vehicle Identification Number (VIN) Malfunction
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0638: Throttle Actuator Control Motor Circuit Range/Performance
- Throttle Actuator Control Motor Circuit Range/Performance Problem Circuit
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0642: Throttle Position Sensor Power Supply
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
  - Check Conditions
  - Judgement Criteria
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0657: Throttle Actuator Control Motor Relay Circuit Malfunction
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
  - Check Condition
  - Judgement Criterion
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P0830: Clutch Pedal Position Switch Circuit Range/Performance
- Notes
- Circuit Operation
- Technical Description
- DTC Set Conditions
  - Check Condition, Judgment Criterion
- Fail-Safe And Backup Function
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1021: Intake Engine Oil Control Valve Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1025: Exhaust Engine Oil Control Valve Circuit
- Notes
- Circuit Operation
- Technical Description
- Descriptions Of Monitor Methods
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1231: Active Stability Control Plausibility
- Technical Description
- DTC Set Conditions
  - Check Condition
  - Judgement Criterion
- Fail-Safe And Backup Function
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1232: Fail Safe System
- Technical Description
- DTC Set Conditions
  - Check Condition
  - Judgement Criterion
- Fail-Safe And Backup Function
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1233: Throttle Position Sensor (main) Plausibility
- Technical Description
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis
DTC P1234: Throttle Position Sensor (Sub) Plausibility
- Technical Description
- Monitor Execution
- MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
  - Other Monitor (There is no temporary DTC stored in memory for the item monitored below)
  - Sensor (The sensor below is determined to be normal)
- DTC Set Conditions
- Fail-Safe And Backup Function
- OBD-II Drive Cycle Pattern
- TROUBLESHOOTING HINTS (The most likely causes for this code to be set are:)
- Diagnosis